News

Show Dates: October 18(Wed.) - 21(Sat.), 2023 Show Time: 09:00 AM - 17:00 PM(Last day will close at 15:00 PM) Venue: Saigon Exhibition & Conference Center (SECC) (799 Nguyen...

"InterPlas Thailand" will usher every plastics manufacturer from every segment, including automotive part makers to new participants from cosmetic packaging, medical equipment, ...

electric preplasticizing refers to the technology that is different from traditional hydraulic drive pre-plasticizing, and uses electric drive plasticization and hydraulic drive...

Metals undergo a corresponding extension when the ambient temperature changes, so the sensor can signal this response in different ways.

A temperature transducer is a sensor that can sense temperature and convert it into a usable output signal. The temperature sensor is the core part of the temperature measuring ...

The cast copper heater uses a tubular electric heating element as the heating element, which is bent and shaped, and then enters the mold and is centrifugally cast into various ...

The ceramic heater is a high-efficiency heater with uniform thermal distribution and a metal alloy with excellent thermal conductivity, which ensures uniform temperature on the ...

A static mixer is a high-efficiency mixing device without moving parts. Its basic working mechanism is to use the mixing unit fixed in the tube to change the flow state of the f...

The permanent magnet variable frequency screw machine is an air compressor that can change the power supply frequency, adjust the load, and reduce power consumption.

The conical twin-screw is different from the parallel twin-screw in appearance, the diameters at both ends are different, the diameter of the feeding section is large, while the...

The plastic extruder screw is the heart of the plastic extruder, and it is an important part of compressing plastic in the plastic extruder. It is an important part of extruding...

1. Acceleration and deceleration are often referred to as variable speed gearboxes.