Knowledge

Compact rubber extruder Degassing screw design – our DeSO System solution Change compounds without changing the degassing screw The DeSO System of the degassing extruder for

L/D RATIO: The L/D ratio is commonly known as the flighted length of the screw.L/D ratio is the distance from the start of the feed pocket to the register face at the end of the me

Abstract Further advances in single screw performance can be achieved by combining grooved barrel feeding and barrier melting mechanism. Properly adapted and fitted in an appropria

Abstract New advances in screw designs and mixing sections have allowed processors to take advantage of new resins, higher production rates, and improved product quality.With the a

Degradable plastics, also known as degradable plastics, refer to a class of polymers that have the same performance as their corresponding ordinary plastic products during a certai

Transparent plastics refer to a class of polymer materials with an ordinary light transmittance of more than 80%. The indicators to measure the performance of transparent plastics

1. Introduction to electric plastics Conductive plastics refer to a class of polymers with a volume resistivity of less than 1MΩ•cm, or a conductivity greater than 2s/cm

1. Introduction to polynaphthalene ethylene glycol plastic The structure and properties of polyethylene naphthalate (PEN) are very similar to those of PET, as long as the benzene r

1. Introduction to polyacrylonitrile copolymer Pure polyacrylonitrile (PAN) has excellent barrier properties, but due to its excessive water absorption, it seriously affects the ba

1. Introduction to polyadipyl-isophthalenedimethylamine Polyadipylisophthalenedimethylamine, referred to as MXD6 in English and generally referred to as "nylon MXD6", is

(2) Vinylidene chloride copolymer 1. Introduction to vinylidene chloride copolymer Vinylidene chloride (VDC) is a high barrier resin with a slightly higher transmittance coefficien

The second type of special-purpose plastics: barrier plastics Barrier plastics refer to a class of polymers with a small pass coefficient for small molecule liquids, gases, water v