Knowledge

1 Introduction to the production of plastic injection molding machine Injection molding machine (referred to as injection machine or injection molding machine) is the main molding

Wrong mold temperature When molding semi-crystalline engineering plastics such as POM (acetal), PA (nylon), PBT, and PET (polyester), it is important to ensure that the temperature

maintenance Ι. Description In order to increase work efficiency, it is possible to increase the running time of the machine, that is, it may be close to 24 hours of operation

The gas-assisted injection molding system is an innovation in traditional injection molding technology, and some even call it a second revolution in injection molding technology. 1

Mold fouling of products Almost all thermoplastic materials experience this problem. Due to the increasing demand for finished products, the requirements for the amount of additive

Injection Casting The so-called injection casting method is to maintain a lower locking force after the injection of material, and then increase the clamping force. As shown in the

一、 Process procedures The requirements for injection molding are different between "recordable disc" (CD-R) and "high-density recordable disc" (DVD+R/DVD-R). DV

1. Advantages of plastic: (1) Easy to process and manufacture (easy to mold) Even if the geometry of the product is quite complex, as long as it can be removed from the mold, it is

0. EBIAS-ERROR-STOP 偏差停机 1. （RESERVED） 预留的 2. CPU-BATTERY IS LOW CPU电量过低 3. VALUE OUT OF RANGE 测定参数超出 4. FLOPPY ERROR 程序错误 5. PRINTER NOT READY 打印机未准备就绪 6. HARDCOPY 内存太小，拷贝困难 13. R

1. Clamping force F(TON) F=Am*Pv/1000 F: Clamping force TON Am: Cavity projection area CM2 Pv: FILLING PRESSURE KG/CM2 (GENERALLY, THE FILLING PRESSURE OF PLASTIC MATERIALS IS 150-